Installation steps：

1 Clean the surface where the decal will be installed

2 Slowly removed the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape.

3 Once your decal is peeled away from the backing, line up & position your decal against the surface to which it will be applied.

4 Use a credit card, squegee, or something similar to smooth down your decal, making sure that it is completely stuck to the surface.

5 Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.

Notice For Use:

1, if you are attached to the surface of the glass or car body, cause of the material are smooth, you’d better use a clean cloth to wipe or clean before to paste it;

2, When attached some larger pattern ,there may be have a little bubbles appear after flattened, then you can use scrape cards blow bubble to removal it. Or use a needle to punctured small bubbles, it will smooth and will not affect the overall